ULN-2550 GPS Disciplined Oscillator

Extremely small GPSDO
Image

The ULN-2550 time-, frequency-, and position-reference is an extremely small Global Positioning System Disciplined Oscillator (GPSDO) optimized for up-conversion applications that require 10 MHz, 25 MHz, 50 MHz, and/or 100 MHz sources. The 10 MHz and 100 MHz outputs are always available, while the 25 MHz output can be changed into a 50 MHz output via stuffing options. The ULN-2550 has the following main features: a high-end SC-cut Double Oven Crystal Oscillator, four 25/50 MHz LVDS outputs, one 100MHz CMOS output, as well as a 10 MHz CMOS output, a 1 PPS LVDS output, and a high-performance 50-channel GPS receiver with -160 dBm tracking capability. With the exception of the GPS antenna connection, the ULN-2550 provides all of its IO and power-input on one single connector that can either have a board-to-board interface, or a cable harness, making system integration straight forward, and compatible to stringent military requirements.

All outputs are frequency and phase-synchronized to UTC via the GPS system, and thus provide Better-Than-Cesium™ long-term performance. By providing 25/50 MHz as well as 100 MHz and 10 MHz references in one compact board, the unit is a good fit for Ultra Low-Phase-Noise up-conversion systems as used in Radar and Satellite communication equipment.

Highlights

  • 10 MHz, 25 MHz/50 MHz, and 100 MHz outputs with 4x LVDS
  • Typical Allan Deviations of <5E-11 with GPS lock for measurement intervals from 1 to 1000 s
  • Phase noise of <125 dBc at >10 Hz offsets is standard
  • Power consumption of <4 W with DOCXO at 25°C
  • A high-end WAAS/EGNOS/MSAS GPS receiver drives an ultra-stable OCXO frequency reference under the control of a 32-bit Processor
  • Hold-over mode with aging and temperature compensation
  • Alarm outputs
  • The unit can be controlled via RS-232 control using standard SCPI commands. Settings are automatically stored in non-volatile memory.
  • Sine Wave, CMOS, and LVDS outputs
  • GPSCon Windows graphing and SNTP server software compatible

Applications

  • The ULN-2550 is a good fit for Ultra Low-Phase-Noise up-conversion systems as used in Radar and Satellite communication equipment.

The ULN-2550 can be ordered with the following configurations depending on the stability/cost requirements:

  • Single oven option, for a very effective cost/performance ratio.
  • Double OCXO, standard operating temperature (−25°C to +75°C), for higher stability and better holdover performance.
  • Double OCXO, extended operating temperature (−40°C to +85°C), for highest stability and best holdover performance.
     

Data Sheets

Support at Every Step

We provide support, services, comprehensive training and the resources you need. It’s all part of what we do to maximize the value of your VIAVI investment.

Let Us Help

We’re here to help you get ahead.