Xgig 4K4 Analyzer Platform for PCI Express 4.0
Xgig 4-Lane PCI Express 4.0 Chassis
The Xgig® 4K4 Protocol Analyzer expands the family of VIAVI protocol analysis products targeting storage and other applications. It provides advanced PCIe and NVMe level trigger and search capabilities designed to reduce debug and problem resolution down time. Interposer autotuning automatically restores signal integrity by reducing insertion loss in both directions, greatly reducing set-up time. Analysis will alert the user to all protocol errors at every layer of the PCIe stack, including state and substate level errors within the LTSSM viewer.
Highlights
- 16GTps, PCIe 4.0 data rate operation. Fully compatible with lower PCIe data rates of 2.5, 5.0 and 8.0GTps
- Link widths up to 4-lanes
- 32GB memory (16GB Up Stream and 16GB Down Stream)
- Memory segmentation for capture of multiple traces
- Host-Client connection for remote debugging using Ethernet or local debugging using USB
- SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
- Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer blocks
- Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
- Full support of LTSSM for PCI Express
- Multicolored LEDs on the front panel specify link speed, lane width and performance
- Field replaceable modular fan and power supply assemblies
- Works with Interposers for CEM slots, Flying-Lead probes, U.2 (SFF-8639), M.2, SFF-8674, OCulink, EDSFF and others
- Supported by Xgig tool suite including Trace Control, Expert and Serialytics
Application
- Full-speed data capture and error injection, enabling detailed functional and performance analysis of PCIe protocol
- Used for IC development, debug and validation, subsystem and system-level testing, firmware and driver development and validation, and performance analysis
- Full-speed data capture and error injection, enabling detailed functional and performance analysis of PCIe protocol
- Used for IC development, debug and validation, subsystem and system-level testing, firmware and driver development and validation, and performance analysis
Benefits
- The Tap ports enable enable multi-analyzer configurations using a single Interposer in the channel
- Cascade up to four Xgig time-correlated trace captures
-
Xgig CEM-slot, 4-lane Interposer Module for PCI Express 4.0
The PCIe4, 4-lane CEM-slot Interposer enables debug and verification of new ICs, system hardware designs, FPGA firmware, validation of system BIOS and software. -
Xgig CEM, 8-lane Interposer Module for PCI Express 4.0
The PCIe4, 8-lane CEM-slot Interposer enables debug and verification of new ICs, system hardware designs, FPGA firmware, validation of system BIOS and software. -
Xgig CEM Type-B, 16-lane Interposer Module for PCI Express 4.0
The PCIe 4.0 16-lane CEM Type-B Interposer enables debug and verification of new ICs, new system hardware designs, FPGA firmware, validation of system BIOS and software. -
Xgig E1 EDSFF Interposer Module for PCI Express 4.0
Xgig4K-PCIe4-X8-E1 is an Active Interposer optimized for developing, debugging and performance tuning NVMe SSD operation in high-density storage servers. -
Xgig Flying-Lead, 4-lane Interposer Module for PCI Express 4.0
The Xgig Flying-Lead Interposer captures signals between controller ICs on the same PCB where there is no connector providing an access point. -
Xgig M.2, 4-lane Interposer Module for PCI Express 4.0
The M.2, 4-lane Interposer for PCI Express® 4.0 is an Active Interposer with a design optimized for M.2 SSD development. -
Xgig Oculink, 4-lane Interposer Module for PCI Express 4.0
The PCIe4, 4-lane OCulink/Slimline Interposer enables debug of new ICs, hardware designs, FPGA firmware, system BIOS and software. Error-injection is supported. -
Xgig SFF-8674, 4-lane Interposer Module for PCI Express 4.0
The SFF-8674 Interposer enables protocol analysis of PCI Express 4.0 traffic between an SFF-8674 attached host chassis port and an endpoint chassis or device. -
Xgig U.2-CEM, 4-lane Interposer Module for PCI Express 4.0
This U.2-CEM Interposer is optimized for NVMe SSD development enabling debug and analysis -
Xgig U.2B-Server, 4-lane Interposer Module for PCI Express 4.0
This U.2-Server, version B Interposer is optimized for development, debugging and tuning of NVMe SSD operation in high-density storage servers
-
Xgig U.3-Server, 4-lane Interposer Module for PCI Express 4.0
Provides a tap of communication between a host-system and a U.3 NVMe SSD for input to the VIAVI PCIe 4.0 Analyzer
Literatura
Hojas de especificaciones
-
Repair and Calibration
Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles. We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests.
Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:
- Minimize business disruption
- Budget
- Measurement Accuracy and Product Reliability
- Measurement Compliance, TL9000 certification and OEM Standards
Productos Relacionados
Asistencia en cada paso
Proporcionamos soporte técnico, servicios, una formación completa y los recursos que necesita. Todo ello forma parte de lo que hacemos con el fin de maximizar el valor de su inversión en VIAVI.
Déjenos ayudarle
Estamos a su disposición para ayudarle a avanzar.