T-BERD/MTS-5800 Platform
Handheld Modular Network Test Platform Up to 10GE
The T-BERD/MTS-5800 handheld network tester is the one tool that network technicians and engineers need to install, turn-up, and maintain their networks. It supports both the legacy and emerging technologies required to handle various network applications including metro/core, mobile backhaul, and business services installations. The industry’s smallest handheld instrument can test throughout the service life cycle, including fiber characterization, service activation, troubleshooting, and maintenance. Advanced Ethernet test features such as TrueSpeed per RFC 6349, J-Profiler™, Wirespeed capture/decode, and automated J-Mentor, help field technicians test their networks faster and more accurately than ever before. Learn more about Fiber Testing and OTDR Testing from VIAVI experts.
Benefits
- Simplifies multitechnology testing with an all-in-one dual-10 G handheld
- Optimized for field use with a multitouch screen, scripted workflows, and clear results
- Supports efficient best practices with repeatable methods and procedures
- Speeds fiber characterization, Ethernet service activation, and troubleshooting tests
- Empowers cell-site technicians to easily install and maintain back haul and front haul networks
- Avoid costly and dangerous tower climbs
Features
- Fully-loaded TDM/PDH to dual 10 G Ethernet, SONET, SDH, Fiber Channel, and OTN support
- Automated, enhanced RFC 2544 and SAMComplete testing per ITU-T Y.1564
- Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed™TCP throughput testing
- Integrated Timing/Synchronization testing including PTP/1588v2, SyncE, Wander, and One Way Delay test
- Fronthaul Testing CPRI/OBSAI Layer 1/Layer 2 and emulation of Baseband and Remote Radio units
- Single- and dual-port versions
- Compatible with VIAVI 4100-Series OTDR modules and Smart Link Mapper™, fiber microscopes, and optical power meters - Learn more about OTDR Testing
- BBU emulation
- RFoCPRI
Applications
- Mobile and backhaul characterization, validation, and troubleshooting
- Converged Ethernet/IP network testing and troubleshooting at 10 Mbps to 10 G interfaces
- Fiber link characterization and troubleshooting
- Installation and maintenance of OTN and legacy SONET/SDH and TDM/PDH networks
- Installation and maintenance of wireless synchronization technologies such as PTP/1588v2 and SyncE
- Remote radio head (RRH) testing at the wireless basestation
- Test RRH health from the bottom of the tower via CPRI links and BBU emulation
- Identify PIM and interference issues from an optical test access point (RFoCPRI)
Additional Resources:
Part of The VIAVI Remote PHY Solution
This product is part of the comprehensive VIAVI Remote PHY turn-up and maintenance solution enabling seamless transitions from legacy to distributed access architectures.
-
CWDM OTDR Modules (4100 Series)
A CWDM OTDR test solution to deploy or maintain and troubleshoot in-service CWDM fiber networks -
DWDM OTDR Modules (4100 Series)
A DWDM OTDR test solution to deploy, maintain and troubleshoot in-service DWDM fiber networks -
OTDR Modules (4100 Series)
OTDR test solution for use in installing, turning up, and maintaining long-haul, metro, FTTx/PON, access, and enterprise networks. -
CWDM Optical Spectrum Analyzer Module (COSA-4055)
The COSA-4055 module offers the functionality and speed of an OSA in a handheld form factor at a fraction of the price of a traditional OSA. It is an ideal test tool for metro/access links and CWDM systems. -
DWDM Optical Channel Checker Module (OCC-4056C)
The OCC-4056C module offers the functionality and speed of an OSA in a handheld form factor at a fraction of the price of a traditional OSA. It is an ideal test tool for metro/access links and DWDM systems. -
Nano OSA Module (4100 Series)
Compact Nano OSA™ modules offering high resolution measurement over full wavelength band for channel verification and spectral analysis in a field rugged package for the deployment of any WDM service. -
Timing Expansion Module V2 (TEM V2)
The field-optimized Timing Expansion Module Version 2 (TEM V2) helps network operators maintain precise synchronization by delivering industry-leading accuracy to field portable timing and synchronization measurements.
-
News Release
VIAVI Provides Benchmarking and Validation for Global O-RAN Plugfest
-
Product Flash
VIAVI Solutions announces the redesign and update of its OTDR product range
-
Product Flash
VIAVI Solutions introduces new compact optical channel checker module for DWDM or Hybrid CWDM/DWDM network testing
-
News Release
VIAVI Announces 2019 Velocity Partner Program Award Winners
Data Sheets
Posters
- 5G Architecture and Specifications
- Automate Your Testing with Job Manager (Infographic)
- OIF FlexE 2.0 - Flexible Use of Ethernet
- Timing and Synchronization Infographic: Vital for 5G-NR TDD Network Success
- Timing and Synchronization Poster
- Top 5 Test Challenges in an Open RAN Environment
- TrueSpeed Poster: Experience Your Network As Your Customers Do
Application Notes
- 5G Network Deployment Handbook
- Manual de implementación de redes 5G (es)
- Burst Testing Ethernet Networks
- DAS Deployment Overview: Streamlined Approaches for DAS Deployments
- Essential Distributed Antenna Systems (DAS) Deployment Testing
- Importance of Testing Public-Safety Mobile Networks
- RFC 6349 Testing with TrueSpeed
- Test Suite for O-RAN Specifications
- Verifying Telecom Synchronization Networks
Brochures
- AOC/DAC/Breakout Cable Tester
- Considering R-PHY?
- DWDM Test and Monitoring Solutions for MSOs
- DWDM Test and Monitoring Solutions for Wireless Service Providers
- Easy Remote Testing of Radiohead Operation with CPRI and OBSAI
- Enhanced RFC 2544 for Single-Service Test
- Essentials of Ethernet Service Activation Overview
- FTTH-Smart Link Mapper (FTTH-SLM)
- IEEE C37.94 Testing with the T-BERD/MTS-5800 Family
- J-Proof for Layer 2 Control Pane Transparency Test
- J-Quick for Basic Connectivity & ThroughPut Test
- One-Way Delay and PTP (IEEE 1588v2) Test Applications
- RFC 6349 Test with TrueSpeed
- Solutions to Accelerate Base Station Development and Roll-Out
- StrataSync: Cloud-Enabled Asset and Test-Data Management
- T-BERD/MTS Datacom Extension Module (DEM)
- T-BERD/MTS-5800 All-in-one handheld network and fiber testing
- T-BERD/MTS-5800 All-In-One Tester Promotes Power Utility Reliability
- T-BERD/MTS-5882 All-In-One Tester Promotes Power Utility Reliability
- T-BERD/MTS-5882 Multi-protocol Network Tester
- Three Steps to Full 5G
- TrueSpeed: RFC 6349 Compliant TCP Test
- Verifying Optical Transport Networks
- Verifying Telecom Synchronization Systems
- Verifying Wireless Fronthaul Networks
- VIAVI Fibre Channel Testing
- Y.1564 SAMComplete for Multi-Service Test
White Papers & Books
- Benchmarking O-RAN Performance
- Ethernet Service OAM Standards and Functionality
- Improving Instrument Management and Increasing Workflow Efficiency
- Next-Generation Cellular Backhaul
- NITRO Wireless Open RAN Test Suite 2024
- O-RAN: An Open Ecosystem to Power 5G Applications
- Open Fronthaul Test Applications with T-BERD/MTS-5800
- Reference Guide to Fiber Optic Testing: Volume 1
- Reference Guide to Fiber Optic Testing: Volume 2
- Remote PHY Architectures: Operational Challenges and Opportunities
- Testing 5G: Tools and Techniques for Successful Implementation, Maintenance and Monetization
- The Evolution of Fronthaul Networks
- The Path to 5G
Selection Guides
Case Studies
Quick References
- Fiber - OTDR Testing, Tips and Tricks
- Network & Service Companion - Ethernet iPerf Network Performance Measurement
- Network & Service Companion - Ethernet Layer 2 Traffic Loopback
- P5000i - Fiber Inspection with the T-BERD/MTS-5800 Platform
- Quick Card: MP-Series USB Power Meter - Measuring Optical Insertion Loss using the T-BERD/MTS-5800
- Quick Card: MP-Series USB Power Meter – Measuring Light Levels with the T-BERD/MTS 5800
- Quick Card: T-BERD/MTS-5800 - 4100-series OTDR, Expert OTDR
- Quick Card: T-BERD/MTS-5800 - 4100-series OTDR, Smart Test Assistant
- Quick Card: T-BERD/MTS-5800 - CWDM Expert OTDR
- Quick Card: T-BERD/MTS-5800 - GNSS Reception Test
- Quick Card: T-BERD/MTS-5800 - Monitoring DS3 Signals at a Digital Cross Connect Panel
- Quick Card: T-BERD/MTS-5800 - OCC-4056 DWDM Channel Checker Module
- Quick Tech Tip: Getting the Most Out of 16 QAM
- Quick Tech Tip: How to Test and Certify AOC/DAC Cables for Data Centers
- Quick Tech Tip: Quickly Find Fiber-to-the-Antenna (FTTA) Issues
- T-BERD/MTS-5800 - 5GNR Discovery
- T-BERD/MTS-5800 - Assigning Floating Options in Stratasync
- T-BERD/MTS-5800 - C37.94 BERT
- T-BERD/MTS-5800 - CPRI Check, Dark Fiber and WDM Loopback Testing
- T-BERD/MTS-5800 - CPRI Check, RRU Connectivity Testing
- T-BERD/MTS-5800 - CPRI Check, RRU Testing with Nokia/ALU BBU Emulation and RF over CPRI Spectrum Analysis
- T-BERD/MTS-5800 - CPRI Check, SFP/SFP+ Loopback Testing
- T-BERD/MTS-5800 - CWDM Optical Spectrum Analyzer (COSA)
- T-BERD/MTS-5800 - CWDM OTDR Smart Test Assistant
- T-BERD/MTS-5800 - Datacom BERT
- T-BERD/MTS-5800 - DS1 PPP Ping Testing (T1 MPLS)
- T-BERD/MTS-5800 - DS3 Bit Error Rate Testing (BERT)
- T-BERD/MTS-5800 - DWDM Expert OTDR
- T-BERD/MTS-5800 - DWDM OTDR Smart Test Assistant
- T-BERD/MTS-5800 - E4100 Module Optical Insertion Loss
- T-BERD/MTS-5800 - E4100 Module Optical Light Source Option
- T-BERD/MTS-5800 - E4100 Module Optical Power Meter
- T-BERD/MTS-5800 - Enabling the GNSS/GPS Receiver for Sky Plot, One-Way Delay, and Sync Measurements
- T-BERD/MTS-5800 - Enabling the Timing Expansion Module
- T-BERD/MTS-5800 - Ethernet AOC/DAC Breakout Cable Testing
- T-BERD/MTS-5800 - Ethernet AOC/DAC Cable Testing
- T-BERD/MTS-5800 - Ethernet Bit Error Rate Testing (BERT)
- T-BERD/MTS-5800 - Ethernet Capture Decode in Copper 10-100-1000 Dual Through Mode v28.0
- T-BERD/MTS-5800 - Ethernet J-Profiler VLAN Analysis
- T-BERD/MTS-5800 - Ethernet Layer 2 Traffic Generation
- T-BERD/MTS-5800 - Ethernet Layer 2 Traffic Loopback
- T-BERD/MTS-5800 - Ethernet Layer 3 IPv4 Ping Test
- T-BERD/MTS-5800 - Ethernet Layer 3 Multicast Analysis
- T-BERD/MTS-5800 - Ethernet Layer 3 Multicast Traffic
- T-BERD/MTS-5800 - Ethernet Layer 3 Traffic Generation
- T-BERD/MTS-5800 - Ethernet Layer 3 Traffic Loopback
- T-BERD/MTS-5800 - Ethernet Optics Self-Test
- T-BERD/MTS-5800 - Ethernet Packet Capture from an Optical TAP, v28.0
- T-BERD/MTS-5800 - Ethernet Packet Capture from SPAN port, v28.0
- T-BERD/MTS-5800 - Ethernet Packet Capture in Copper 10-100-1000 Dual Through Mode v28.0
- T-BERD/MTS-5800 - Ethernet Packet Capture in Optical SFP Through Mode v29.0
- T-BERD/MTS-5800 - Ethernet RFC 2544 Layer 2 Traffic
- T-BERD/MTS-5800 - Ethernet RFC 2544 Layer 3 Traffic
- T-BERD/MTS-5800 - Ethernet RFC 6349 TrueSpeed - Local Unit
- T-BERD/MTS-5800 - Ethernet RFC 6349 TrueSpeed - Remote Unit
- T-BERD/MTS-5800 - Ethernet RFC 6349 TrueSpeed Test to Fusion VNF
- T-BERD/MTS-5800 - Ethernet Voice over IP (VOIP) SIP Trunk Testing
- T-BERD/MTS-5800 - Ethernet Y.1564 L2 Multiple Streams
- T-BERD/MTS-5800 - Ethernet Y.1564 L2 Traffic
- T-BERD/MTS-5800 - Exporting System Information and Software Option Inventory
- T-BERD/MTS-5800 - Fiber Channel Layer 2 Traffic
- T-BERD/MTS-5800 - FTTA OTDR, Cell Tower Maintenance
- T-BERD/MTS-5800 - IEEE 1588v2 Precision Timing Protocol (PTP) G.8265.1 Telecom Profile Architecture Verification
- T-BERD/MTS-5800 - IEEE 1588v2 Precision Timing Protocol (PTP) G.8275.1 Telecom Profile Architecture Verification
- T-BERD/MTS-5800 - IEEE 1588v2 Precision Timing Protocol (PTP) G.8275.2 Telecom Profile Architecture Verification
- T-BERD/MTS-5800 - IEEE 1588v2 Precision Timing Protocol (PTP) Telecom Profile 2008 Architecture Verification
- T-BERD/MTS-5800 - Installing New Options Using an Option Key
- T-BERD/MTS-5800 - ISDN Primary Rate Interface (PRI) Testing
- T-BERD/MTS-5800 - Measuring the Time Delay of a Satellite Antenna and Cable System
- T-BERD/MTS-5800 - Monitoring DS1 Signals at a Digital Cross Connect Panel
- T-BERD/MTS-5800 - One Way Delay (OWD) Measurement
- T-BERD/MTS-5800 - OTN Check Test
- T-BERD/MTS-5800 - Real Time Testing with Expert OTDR
- T-BERD/MTS-5800 - Real Time Testing with OTDR Smart Test Assistant
- T-BERD/MTS-5800 - Remote Operation and File Transfer with Smart Access Anywhere
- T-BERD/MTS-5800 - SONET Bit Error Rate Testing (BERT)
- T-BERD/MTS-5800 - StrataSync
- T-BERD/MTS-5800 - T1 Bit Error Rate Testing (BERT)
- T-BERD/MTS-5800 - Tuning SFP+ Transceiver
- T-BERD/MTS-5800 - Updating Software via Internet
- T-BERD/MTS-5800 - Using the Android Mobile Tech App
- T-BERD/MTS-5800 - Using the iOS Mobile Tech App
- T-BERD/MTS-5800 – Ethernet Layer 4 TCP WireSpeed Throughput Test to an iPERFv3 Server
- T-BERD/MTS-5800 – Updating Software with a USB Flash Drive
- Wireless - OneAdvisor 800 - CPRI Analyzer Based PIM Detection and Mitigation
Software & Firmware Releases
Services
Software Download
Video
- COSA-4055 CWDM Optical Channel Checker
- Fiber Complete, New Features in v21.x
- Lighting the Path to 5G: A Deeper Dive
- Lighting the Path to 5G: The Complexities of 5G
- Lighting the Path to the Future
- Network Slicing: 5G Networks
- StrataSync TPA Overview
- T-BERD/MTS 5800: Fiber Inspection with P5000i
- T-BERD/MTS 5800: OTDR Smart Test Assistant
- T-BERD/MTS 5800: Y.1564 Layer 2 Multiple Streams
- T-BERD/MTS: How to Inspect Fiber with T-BERD/MTS handheld testers
- T-BERD/MTS: How to Reference with FiberComplete
- T-BERD/MTS: How to Set Up FiberComplete
- T-BERD/MTS: How to Transfer Files from T-BERD
- T-BERD/MTS: Using the T-BERD Source and Power Meter
- VIAVI 5G Solutions Overview
- Webinar: Even Virtual Networks Need Real Testing
Webinar
- Analyzing live network traffic with the T-BERD/MTS-5800
- Automating Test Workflow to Accelerate Jobs
- Ethernet and CPRI SFP testing
- Ethernet Basics
- Even Virtual Networks Need Real Testing
- Getting Started with the T-BERD/MTS-5800
- GPS Antenna and NTP Testing with the T-BERD/MTS 5800 and JD785B
- How to Effectively Operationalize DAA
- Layer 3 Testing with the T-BERD/MTS-5800
- Layer 4 Testing with the T-BERD/MTS-5800
- O-RAN Testing
- Remote Service Testing with the T-BERD 5800
- Selecting the best method to measure Ethernet Network Performance with the T-BERD 5800
- Test Process Automation with Job Manager, Stratasync and the Mobile Tech App
- Testing Business Voice Services witht the T-BERD/MTS-5800: ISDN PRI and SIP Trunks
- Testing CWDM, DWDM, and CPRI in the CRAN Fronthaul
- Testing Ethernet at 10Gig and Beyond with the T-BERD/MTS-5800
- The Essentials of Ethernet Service Activation - Part 1
- The Essentials of Ethernet Service Activation - Part 2
- The Essentials of Ethernet Service Activation - Part 3
- The Sudden Rise of Open RAN
- Transport Technologies and Testing Strategies for 5G Deployment
- Understanding 5G: Lessons from the Field
Care Support Plans
Product Group | Recommend Plan | Bronze | Silver | Maxcare | Why Calibrate? |
---|---|---|---|---|---|
T-BERD/MTS-58xx incl. 100G | MaxCare-5 | Why calibrate this product? What are the common issues? |
|||
T-BERD/MTS-58xx Rackmount - MAP-2100 | MaxCare-5 | Why calibrate this product? What are the common issues? |
-
VIAVI Care Support
Services Bronze Silver MaxCare ImageImageImageTechnical Assistance Premium Premium Premium Factory Repair Priority Service Self-paced Training Factory Calibration Express Loaner * 5-year plans only; if applicable
-
VIAVI Care Support for Existing Equipment
Image
FleetCareFleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.
- Any collection instruments with a single coterminous renewal date
- Each contract is customized with any number of annual terms required by the customer
- Onsite Calibration, Training, Field Application Engineer days can be added
-
Repair and Calibration
Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles. We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests.
Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:
- Minimize business disruption
- Budget
- Measurement Accuracy and Product Reliability
- Measurement Compliance, TL9000 certification and OEM Standards
-
Refurbished Equipment
Save on the test equipment you trust and purchase VIAVI pre-owned test equipment with confidence.
Top reasons for buying used test equipment un the VIAVI Encore program
- Cost saving: Round out your test instrument set at a discount.
- Accelerated delivery time: The product is ready to ship as soon as it is announced.
- 1 year warranty, calibration and OEM approved parts are included in the refurbishment
- Environmentally friendly reuse reduces e-waste and pollution
- Maintaining consistent procedures across your team is easy when everyone is using the same tool
Is Instrument Trade-In to Trade up available?
Yes! You can often trade in products you have owned for a few years and upgrade to the latest and greatest fleet for your team through the VIAVI trade in program. Please work with your sales representative to obtain a trade-in to trade-up quotation.
Training Courses
Support at Every Step
We provide support, services, comprehensive training and the resources you need. It’s all part of what we do to maximize the value of your VIAVI investment.
Let Us Help
We’re here to help you get ahead.