Платформа MTS-5800-100G

Портативная модульная сетевая тестовая платформа до 100GE

Портативный сетевой тестер MTS 5800-100G — это тот самый инструмент, который необходим техническим специалистам и инженерам для монтажа и технического обслуживания сетей. Он поддерживает как традиционные, так и передовые технологии сетевых приложений, включая приложения для тестирования опорных и городских сетей, сетей центра обработки данных и сетей предоставления коммерческих услуг.

Самый компактный в отрасли портативный двухпортовый тестер 100G обеспечивает возможность тестирования сети на протяжении всего жизненного цикла обслуживания сети, включая проверку оптоволокна, активацию сервисов, поиск и устранение неисправностей и техническое обслуживание. Тестер 5800-100G оснащен интерфейсами по новейшей технологии, в том числе SFP/SFP+/SFP28 и QSFP+/QSFP28/CFP4, что обеспечит защиту инвестиций, необходимых для осуществления роста сетей без снижения уровня удовлетворенности заказчиков. Благодаря усовершенствованным функциям тестирования, таким как внутренняя проверка оптоволокна, измерение и декодирование линейной скорости Ethernet-соединения и проверка сетей OTN, специалисты получили возможность быстрее и точнее тестировать сети.

Преимущества

Многофункциональный портативный тестер с двумя портами 100 Гбит/с упрощает тестирование сетей, построенных с использованием нескольких технологий
Тестер оптимально подходит для работы в эксплуатационных условиях. Он оснащен сенсорным экраном с функцией «multitouch», поддерживает работу по заданным сценариям и предоставляет результаты тестов в формате «прошел/не прошел»
Поддерживает эффективные передовые технологии, методы и процедуры
Прибор ускоряет тестирование оптоволокна, активацию сервисов Ethernet, и диагностические тесты

Области применения

Тестирование, поиск и устранение неисправностей для конвергентных сетей Ethernet/IP со скоростью передачи данных от 10 Мбит/с до 100 Гбит/с, применяемых в центрах обработки данных, опорных и городских сетях
Определение характеристик, поиск и устранение неисправностей каналов волоконно-оптических линий связи
Монтаж и техническое обслуживание сетей OTN, сетей ранее используемых стандартов SONET/SDH и DSx/PDH
Определение характеристик, проверка, поиск и устранение неисправностей (включая синхронизацию) мобильных и магистральных сетей
Совместимость со стандартом 5G
Запуск, проверка эксплуатационных характеристик и техническое обслуживание для подводных кабельных сетей

Характерные особенности

Поддержка комплексного тестирования скорости передачи данных в диапазоне от стандарта DSx/PDH (1,5/2 Mбит/с) до стандарта OTU4 (112 Гбит/с).
Самый быстрый в отрасли тест активации Ethernet-сервисов RFC 2544 и Y.1564 SAMComplete™ экономит время, включая измерение сетевой задержки с наносекундной точностью. Также поддерживается тест RFC 6349 TrueSpeed
Функция внутреннего тестирования оптоволокна, оптимизированная для применения в эксплуатационных условиях, обеспечивает безошибочную работу модулей QSFP+/QSFP28 и CFP4
Высокая скорость и эффективность тестирования активации сервисов в сетях OTN с помощью автоматизированного сценария рабочего процесса проверки сетей OTN
Поддержка оптического рефлектометра VIAVI серии 4100 и модулей COSA с функцией Smart Link Mapper™, микроскопов для тестирования оптоволокна и измерителей оптической мощности
Возможность проверки синхронизации и таймирования с помощью модуля TEM (Timing Expansion Module)
Тестирование AOC/DAC/breakout-кабелей

Дополнительные ресурсы:

Литература

Спецификации

Брошюры

Постеры

Приложения к руководствам

White Papers и книги

Практические кейсы

Краткие руководства пользователя

Руководства по подбору

Программное обеспечение

Видео

Вебинары

Care Support Plans

Product Group	Recommend Plan	Bronze	Silver	Maxcare	Why Calibrate?
T-BERD/MTS-58xx incl. 100G	MaxCare-5				OTN/SONET/SDH/E1/T1 have transmit frequencies which need to be accurate to meet the specifications. Factory standards to ensure accuracy VIAVI Calibrates to TL9000 factory standards to ensure your instrument is certified to measure accurately, as it did when it came off the factory line. Instruments that are out of calibration will produce unreliable measurements and can create false passing or false failing test results that often cause your team repeat work. We maintain, polish and clean all fiber connectors, fix pigtail connections that are internal to the product to ensure all ports stay in good working order and upgrade software / firmware to the latest approved release to enable enhancements. VIAVI Care Plans are the most cost-effective way to plan for calibration with a low, discounted price at the time of instrument purchase, however fixed rate calibration can be purchased at a later date on a separate purchase order. Ensure accurate measurements that meet calibration and service level agreements, ISO and TL standards for network test procedures. Ensure all test transmission signals work properly to avoid issues such as not reaching full line rate testing rate required to validate service bandwidth, speed and quality of service (QoS). Maintain ports and connectors to keep test transmissions working properly and to extend the life of the instrument. For example, if optical connectors and, lasers are bad or electrical/RF interface ports are loose after years of connection cycles, OTDR, TDR, and Radio Frequency measurements will not work properly. When doing construction, installation and activation work that must be certified, all network components typically must be tested with a certified, calibrated instrument to preserve warranty from manufacturer, such as fiber optic cable manufactures. Accurate RF frequencies and optical wavelengths are critical to meet measurement specifications. If using these to validate network elements, power levels, transmission rates, out of specification tools will prevent validation of network elements and signals. Why calibrate this product? Full line rate transmission may not reached leading to a violation of Customer SLA when full line rate test is specified What are the most common implications of these issues to the business? Uncalibrated tools produce unreliable measurement results that can't be certified to specifications and may violate service level agreements or ISO/TL9000 standards with your customers and their network equipment vendors. QoS certification may be inaccurate and generate a repeat test need. Contractors are often not compensated or could be delisted as an approved service supplier due to incorrect results. Full manufacturer warranty (20-30 years) from cable suppliers (e.g. Corning, CommScope, Belden, ect.) will only be granted if the installation is certified with a calibrated instrument, thus the network owner is motivated to comply with correct installation certification procedures to retain and enforce the warranty on expensive cabling and optical network elements, etc. Common Business impacts include: Lost revenue, customer complaints and increased costs: Most network operators track and audit repeat work done by sub-contractors and often there is a billing dispute in these cases. Contractors with high rates of inaccurate test results are usually hired for less or not at all when not meeting SLA agreements or quality metrics. For Network Operators, repeat service quality issues with customers often causes added cost, customer dissatisfaction and loss of business. Example: Let's look at OTN/SONET/SDH/E1/T1 and various FTTX, DOCIS and xDSL measurements. It is critical to reach full line rate (1G, 10G, 40G, 100G) to test service performance and service error rates. If the uncalibrated tester can not reach full line rate during testing, a customer may be left with suboptimal performance that will quickly create complaints or alternatively, the technician could end up chasing phantom network problems that do not exist. What are the common issues?
T-BERD/MTS-58xx Rackmount - MAP-2100	MaxCare-5				Cable & Antenna analyzers are measuring frequencies which need to be accurate to meet the specifications. Open/short load calibration must be done prior to measuring by customer. Factory standards to ensure accuracy VIAVI Calibrates to TL9000 factory standards to ensure your instrument is certified to measure accurately, as it did when it came off the factory line. Instruments that are out of calibration will produce unreliable measurements and can create false passing or false failing test results that often cause your team repeat work. We maintain, polish and clean all fiber connectors, fix pigtail connections that are internal to the product to ensure all ports stay in good working order and upgrade software / firmware to the latest approved release to enable enhancements. VIAVI Care Plans are the most cost-effective way to plan for calibration with a low, discounted price at the time of instrument purchase, however fixed rate calibration can be purchased at a later date on a separate purchase order. Ensure accurate measurements that meet calibration and service level agreements, ISO and TL standards for network test procedures. Ensure all test transmission signals work properly to avoid issues such as not reaching full line rate testing rate required to validate service bandwidth, speed and quality of service (QoS). Maintain ports and connectors to keep test transmissions working properly and to extend the life of the instrument. For example, if optical connectors and, lasers are bad or electrical/RF interface ports are loose after years of connection cycles, OTDR, TDR, and Radio Frequency measurements will not work properly. When doing construction, installation and activation work that must be certified, all network components typically must be tested with a certified, calibrated instrument to preserve warranty from manufacturer, such as fiber optic cable manufactures. Accurate RF frequencies and optical wavelengths are critical to meet measurement specifications. If using these to validate network elements, power levels, transmission rates, out of specification tools will prevent validation of network elements and signals. Why calibrate this product? Full line rate transmission may not reached leading to a violation of Customer SLA when full line rate test is specified What are the most common implications of these issues to the business? Uncalibrated tools produce unreliable measurement results that can't be certified to specifications and may violate service level agreements or ISO/TL9000 standards with your customers and their network equipment vendors. QoS certification may be inaccurate and generate a repeat test need. Contractors are often not compensated or could be delisted as an approved service supplier due to incorrect results. Full manufacturer warranty (20-30 years) from cable suppliers (e.g. Corning, CommScope, Belden, ect.) will only be granted if the installation is certified with a calibrated instrument, thus the network owner is motivated to comply with correct installation certification procedures to retain and enforce the warranty on expensive cabling and optical network elements, etc. Common Business impacts include: Lost revenue, customer complaints and increased costs: Most network operators track and audit repeat work done by sub-contractors and often there is a billing dispute in these cases. Contractors with high rates of inaccurate test results are usually hired for less or not at all when not meeting SLA agreements or quality metrics. For Network Operators, repeat service quality issues with customers often causes added cost, customer dissatisfaction and loss of business. Example: Let's look at OTN/SONET/SDH/E1/T1 and various FTTX, DOCIS and xDSL measurements. It is critical to reach full line rate (1G, 10G, 40G, 100G) to test service performance and service error rates. If the uncalibrated tester can not reach full line rate during testing, a customer may be left with suboptimal performance that will quickly create complaints or alternatively, the technician could end up chasing phantom network problems that do not exist. What are the common issues?

Техническая поддержка VIAVI Care

Услуги	BronzeCare	SilverCare	MaxCare	GoldCare	FleetCare
	Изображение	Изображение	Изображение	Изображение	Изображение
Техническая поддержка	Премиум	Премиум	Премиум	Премиум	Премиум
Заводской ремонт				Стандартные услуги + специальное меню. Калибровка и обучение на местах, выезд инженера технической поддержки, заказная разработка или подписка на ПО
Приоритетное обслуживание
Онлайн-обучение
Гарантия 5 лет на аккумулятор и сумку*
Заводская калибровка
Гарантия на аксессуары
Экспресс-кредиты

* только для 5-летних программ

Гарантия на замену батареи/сумки
Батареи и сумки изнашиваются от каждодневного использования и в результате циклов зарядки. Чтобы этот фактор не повлиял на результативность работы, в 5-летних программах предусмотрена возможность замены аксессуаров.

VIAVI обеспечивает разовую замену вышедшей из строя батареи и изношенной сумки/перчатки в течение 5-летней программы поддержки SilverCare или MaxCare. Замена проводится только при возврате оборудования в VIAVI на ремонт или калибровку. Программа не охватывает жесткие футляры и не распространяется на оборудование, продаваемое без сумки/батареи.

Действует на 5-летних программах Silver и MaxCare.

Экспресс-кредиты
Now you can schedule calibrations or repairs with no downtime. The Express Loaner Service provides you with a similarly configured piece of equipment before sending yours in for calibration or for that unexpected repair that you need immediately.

Замена аксессуаров MaxCare
Контрольно-измерительное оборудование поставляется с кабелями и разъемами. Для обеспечения достоверности тестирования программа включает в себя замену одного аксессуара один раз в год.

Если аксессуар будет признан дефектным или вышедшим из строя, VIAVI заменит или отремонтирует его (по своему усмотрению) бесплатно для клиента. Замененные аксессуары могут быть новыми или восстановленными. Все возвращенные аксессуары становятся собственностью VIAVI. Действуют следующие ограничения: допускается замена не более чем одного аксессуара в течение 12 месяцев; программа распространяется только на те аксессуары, которые считаются незаменимыми для работы оборудования и поставлялись с изначально приобретенным продуктом. Клиент несет обязательство по отправке вышедшего из строя аксессуара в VIAVI, если его надежность вызвала вопросы во время калибровки или ремонта.

VIAVI Care Support for Existing Equipment

FleetCare

FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.

Any collection instruments with a single coterminous renewal date
Each contract is customized with any number of annual terms required by the customer
Onsite Calibration, Training, Field Application Engineer days can be added

View Brochure

Repair and Calibration
Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles. We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests.

Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:

Minimize business disruption

Budget

Measurement Accuracy and Product Reliability

Measurement Compliance, TL9000 certification and OEM Standards

Explore More
Refurbished Equipment
Save on the test equipment you trust and purchase VIAVI pre-owned test equipment with confidence.

Top reasons for buying used test equipment un the VIAVI Encore program

Cost saving: Round out your test instrument set at a discount.

Accelerated delivery time: The product is ready to ship as soon as it is announced.

1 year warranty, calibration and OEM approved parts are included in the refurbishment

Environmentally friendly reuse reduces e-waste and pollution

Maintaining consistent procedures across your team is easy when everyone is using the same tool

Is Instrument Trade-In to Trade up available?

Yes! You can often trade in products you have owned for a few years and upgrade to the latest and greatest fleet for your team through the VIAVI trade in program. Please work with your sales representative to obtain a trade-in to trade-up quotation.

Explore More

View VIAVI Encore Inventory List

Training Courses

This course presents a detailed overview of technology fundamentals including the topology, protocol-oriented network problems, fault isolation, and real-world issues that impact quality of service. Learn the recommended layered/structured approach for testing and troubleshooting techniques to test and certify Ethernet circuits, including proper fiber inspection techniques.

Course Number

TT-ETHERNET-IP

Course Highlights

Understand the fundamental operation of Ethernet/IP networks including the network components and architecture, connectors and cable types, errors and alarms
Comprehend the purpose and need for auto-negotiation, Ethernet switching, flow control, and prioritization functions
Detail the structured approach to test and troubleshoot Ethernet/IP networks including VLANs
Describe the the characteristics of the TCP/IP protocol suite and how to perform protocol analysis on an IP network
Become familiar with how to employ the RFC 2544 and Y.1564 automated testing scripts

Продолжительность

1 день

Locations

United States

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents a detailed overview of the basic technology fundamentals including the topology, network problems and fault isolation, and real-world issues that impact quality of service as well as fiber inspection techniques and connectivity/continuity tests. Learn the recommended approach for how to characterize and certify fiber using three key fiber tests, fiber inspection, connectivity/continuity and OTDR for FTTx, FTTP, and FTTA. Understand how to confidently troubleshoot network faults and locate problems in xWDM and PON networks.

Course Number

TT-FIBER

Course Highlights

Understand light propagation, network components and architecture, connectors and cable types, fiber losses and attenuation process
Describe the causes of loss in fiber networks
Understand the recommended fiber inspection and cleaning techniques and describe the proper process to perform fiber optic connectivity/continuity and OTDR tests

Продолжительность

1 день

Locations

United States

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents a detailed overview of the Optical Time Domain Reflectometer (OTDR) test. After a review of basic technology fundamentals, topology, network problems, and the process and techniques to perform fiber inspection and connectivity/continuity tests, participants will learn how the OTDR test works. Understand how to effectively use an OTDR test and the recommended approach to certify fibers, troubleshoot network faults, and locate problems in xWDM and PON networks.

Course Number

TT-FIBER-OTDR

Course Highlights

Understand the recommended fiber inspection and cleaning techniques and describe the proper process to perform
Detail the steps involved in the process to perform fiber optic connectivity/continuity tests
Understand the fundamental operation of an OTDR test
Describe what conditions impact the accuracy of the OTDR test
Detail the steps involved in the process to perform an OTDR test including event analysis

Продолжительность

1 день

Locations

United States

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents a detailed overview of the technology fundamentals and Passive Optical Networks (PONs) including the topology, network problems and fault isolation, and real-world issues that impact quality of service as well as fiber inspection techniques and connectivity/continuity tests. Learn the recommended approach for how to characterize and certify fiber using three key fiber tests, fiber inspection, connectivity/continuity and OTDR for FTTx, FTTP, and FTTA. Understand how to confidently troubleshoot network faults and locate problems in FTTx and PON networks.

Course Number

TT-FTTX

Course Highlights

Understand light propagation, network components and architecture, connectors and cable types, fiber losses and attenuation process
Describe the causes of loss in fiber networks
Understand the recommended fiber inspection and cleaning techniques
Describe the proper process to perform fiber optic connectivity/continuity tests
Understand the fundamental operation of an OTDR test
Describe what conditions impact the accuracy of the OTDR test
Detail the steps involved in the process to perform an OTDR test including event analysis

Продолжительность

2 дня

Locations

United States

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents a detailed overview of the technology fundamentals including the topology, network problems and fault isolation, and real-world issues that impact quality of service as well as fiber inspection techniques and connectivity/continuity tests. Learn the recommended approach for how to test and evaluate the performance of DWDM networks using OTDR and PMD tests. Understand how to confidently troubleshoot network faults and locate problems in DWDM networks.

Course Number

TT-DWDM-VC

Course Highlights

Understand light propagation, DWDM network components and architecture, connectors and cable types, fiber losses and attenuation process, and the recommended fiber inspection and cleaning techniques
Describe the multiplexing process
Define PMD and why it needs to be measured
Understand the operation of an OTDR test and what conditions impact the accuracy of it
Describe the recommended approach to DWDM and PMD testing and for troubleshooting

Продолжительность

1 день

Locations

Global

Языки

English
Other languages available upon request

Course Number

TT-ETHERNET-IP-VC

Course Highlights

Understand the fundamental operation of Ethernet/IP networks including the network components and architecture, connectors and cable types, errors and alarms
Comprehend the purpose and need for auto-negotiation, Ethernet switching, flow control, and prioritization functions
Detail the structured approach to test and troubleshoot Ethernet/IP networks including VLANs
Describe the the characteristics of the TCP/IP protocol suite and how to perform protocol analysis on an IP network
Become familiar with how to employ the RFC 2544 and Y.1564 automated testing scripts

Продолжительность

1 день

Locations

Global

Языки

English
Other languages available upon request

Course Number

TT-FIBER-VC

Course Highlights

Understand light propagation, network components and architecture, connectors and cable types, fiber losses and attenuation process
Describe the causes of loss in fiber networks
Understand the recommended fiber inspection and cleaning techniques and describe the proper process to perform fiber optic connectivity/continuity and OTDR tests

Продолжительность

1 день

Locations

Global

Языки

English
Other languages available upon request

Course Number

TT-FIBER-OTDR-VC

Course Highlights

Understand the recommended fiber inspection and cleaning techniques and describe the proper process to perform
Detail the steps involved in the process to perform fiber optic connectivity/continuity tests
Understand the fundamental operation of an OTDR test
Describe what conditions impact the accuracy of the OTDR test
Detail the steps involved in the process to perform an OTDR test including event analysis

Продолжительность

1 день

Locations

United States

Языки

English
Other languages available upon request

Course Number

TT-FTTX-VC

Course Highlights

Understand light propagation, network components and architecture, connectors and cable types, fiber losses and attenuation process
Describe the causes of loss in fiber networks
Understand the recommended fiber inspection and cleaning techniques
Describe the proper process to perform fiber optic connectivity/continuity tests
Understand the fundamental operation of an OTDR test
Describe what conditions impact the accuracy of the OTDR test
Detail the steps involved in the process to perform an OTDR test including event analysis

Продолжительность

2 дня

Locations

United States

Языки

English
Other languages available upon request

This course presents an overview of performing an OTDR test using the FTTH-SLM mode on the SmartOTDR tester. Learn how to set up an OTDR test for a 1x8 configuration, run the test, and locate, review and save test results.

Course Number

TT-ETHERNET-SP

Продолжительность

1 час

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

Course Number

TT-DWDM

Course Highlights

Understand light propagation, DWDM network components and architecture, connectors and cable types, fiber losses and attenuation process, and the recommended fiber inspection and cleaning techniques
Describe the multiplexing process
Define PMD and why it needs to be measured
Understand the operation of an OTDR test and what conditions impact the accuracy of it
Describe the recommended approach to DWDM and PMD testing and for troubleshooting

Продолжительность

1 день

Locations

United States

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents an overview of the recommended Inspect Before You Connect (IBYC) process. Learn how to properly inspect, clean, and test fiber end-faces before making connections.

Course Number

TT-FITBAS-SP

Продолжительность

15 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents a solid foundation of understanding for Fiber Optic technology and concepts. Learn about fiber safety and standards, light propagation, network components and architecture, connectors and cable types, and fiber losses and attenuation process.

Course Number

TT-FIBBAS-SP

Продолжительность

15 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents a solid foundation of understanding for Fiber Optic testing concepts. Learn about the importance of embracing the proper fiber inspection, cleaning, and basic fiber testing process and techniques, and the basic fiber tests and the tools needed to perform.

Course Number

TT-FIBTESTBAS-SP

Продолжительность

30 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of the key concepts for performing testing operations in Fiber-to-the-X (FTTX) networks and Passive Optical Networks (PONs). Learn about testing methods for FTTX and PON circuits, and how to test the Optical Signal-to-Noise Ratio (OSNR) in Reconfigurable Optical Add Drop Multiplexer (ROADM) networks.

Course Number

TT-FTTx-PON-BAS-SP

Продолжительность

30 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of IP Routing concepts and the operation of Multi Protocol Label Switching networks. Learn about the routing equipment and protocols, and how data flows through the network.

Course Number

TT-IP-RTG-MPLS-SP

Продолжительность

30 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of the key concepts for Internet Protocol (IP; ISO Layer 3) technology. Learn about the topology, protocol-oriented network problems and real-world issues that impact quality of service, how to perform testing and isolate faults.

Course Number

TT-IP-SP

Продолжительность

30 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of the key concepts for IPTV networks and technology. Learn about IPTV protocols and basic MPEG fundamentals, requirements for proper operation, and IPTV testing methods.

Course Number

TT-IPTV-SP

Продолжительность

30 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

Course Number

TT-VoIP-SP

Продолжительность

30 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of the various xDSL technologies and networks. Learn about the xDSL variations and rates, copper line characteristics, network components and topologies, and the testing process.

Course Number

TT-xDSL-SP

Продолжительность

30 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents the technical foundation necessary to gain a basic understanding of the Optical Time Domain Reflectometer (OTDR) test. Learn the best practices for performing OTDR tests and how to understand the OTDR trace results.

Course Number

TT-OTDRBAS-SP

Продолжительность

20 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents a detailed overview of technology fundamentals, testing, and troubleshooting using the product, including how to navigate the GUI and menus. Learn to characterize and certify fiber using three key fiber tests, fiber inspection, connectivity/continuity and OTDR for FTTx, FTTP, and FTTA. Utilize the test set to confidently troubleshoot network faults and locate problems in xWDM and PON networks.

Course Number

TT-TB5800-OTDR

Course Highlights

Understand light propagation, network components and architecture, connectors and cable types, fiber losses and attenuation process
Navigate the product GUI and menus to configure for Fiber Optic testing
Perform fiber optic connectivity/continuity and OTDR tests: inspection and cleaning of all optical connections, optical insertion loss (OIL) and optical return loss (ORL), end-to-end loss testing with optical power meter (OPM) and optical light source (OLS), OTDR cable analysis
Save and restore test configurations, using StrataSync and MobileTech App

Продолжительность

2 дня

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents a detailed overview of technology fundamentals, testing, and troubleshooting techniques using the product, including how to navigate the GUI and menus. Learn the recommended layered/structured approach to test and certify T-Carrier, SONET, and Ethernet circuits, including proper fiber inspection techniques. Utilize the test set to confidently troubleshoot network faults and locate problems on all rates of electrical and optical Ethernet systems (up to 10GigE).

Course Number

TT-TB5800

Course Highlights

Understand the fundamental operation of T-Carrier, SONET, and Ethernet networks including the network components and architecture, connectors and cable types, errors and alarms
Detail the structured approach to test and troubleshoot T-Carrier, SONET, and Ethernet networks
Navigate the product GUI and menus to configure for T-Carrier, SONET, and Ethernet testing
Perform T-Carrier tests: monitoring; BER, Fractional T1, and loopback tests; timing
Perform SONET tests: inspection and cleaning of all optical connections; optical power; monitoring; BER and Drop and Insert tests, manipulating Bytes; timing
Perform Ethernet tests: inspection and cleaning of all optical connections; optical BER test on Layer 1; Layer 2 monitoring traffic, BER, loopback, timing tests; Layer 3 monitoring traffic, IP Ping and TraceRoute, loopback, end-to-end traffic generation tests; Layer 2 and 3 RFC 2544 and Y.1564 automated tests
Save and restore test configurations, using StrataSync and MobileTech App

Продолжительность

2 дня

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents a detailed overview of technology fundamentals, testing, and troubleshooting techniques using the product, including how to navigate the GUI and menus. Learn the recommended layered/structured approach to test and certify Ethernet circuits, including proper fiber inspection techniques. Utilize the test set to confidently troubleshoot network faults and locate problems on 10G/40G/100G optical Ethernet systems.

Course Number

TT-TB5800-100G

Course Highlights

Understand the fundamental operation of 10G/40G/100G Ethernet networks including the network components and architecture, connectors and cable types, errors and alarms
Detail the structured approach to test and troubleshoot 10G/40G/100G Ethernet networks
Navigate the product GUI and menus to configure for 10G/40G/100G Ethernet testing
Perform 10G/40G/100G Ethernet tests: inspection and cleaning of all optical connections; optical BER test on Layer 1; Layer 2 monitoring traffic, BER, loopback, timing tests;
Layer 3 monitoring traffic, IP Ping and TraceRoute, loopback, end-to-end traffic generation tests; Layer 2 and 3 RFC 2544 and Y.1564 automated tests
Save and restore test configurations, using StrataSync and MobileTech App

Продолжительность

2 дня

Locations

United States

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents a detailed overview of technology fundamentals, testing, and troubleshooting techniques using the product, including how to navigate the GUI and menus. Learn the recommended layered/structured approach to test and certify Ethernet circuits, including proper fiber inspection techniques. Utilize the test set to confidently troubleshoot network faults and locate problems on all rates of electrical and optical Ethernet systems (up to 10GigE).

Course Number

TT-TB5800-ETH

Course Highlights

Understand the fundamental operation of Ethernet networks including the network components and architecture, connectors and cable types, errors and alarms
Detail the structured approach to test and troubleshoot Ethernet networks
Navigate the product GUI and menus to configure for Ethernet testing
Perform Ethernet tests: inspection and cleaning of all optical connections; optical BER test on Layer 1; Layer 2 monitoring traffic, BER, loopback, timing tests; Layer 3 monitoring traffic, IP Ping and TraceRoute, loopback, end-to-end traffic generation tests; Layer 2 and 3 RFC 2544 and Y.1564 automated tests
Save and restore test configurations, using StrataSync and MobileTech App

Продолжительность

2 дня

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

Course Number

TT-TB5800-ETH-CPRI

Продолжительность

2 дня

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents a detailed overview of testing and troubleshooting techniques using the product, including how to navigate the GUI and menus.

Day 1: Learn to characterize and certify fiber using three key fiber tests; fiber inspection, connectivity/continuity, and OTDR for FTTx, FTTP, and FTTA. Utilize the test set to confidently troubleshoot network faults and locate problems in xWDM and PON networks.

Day 2: Learn the recommended layered/structured approach to test and certify Ethernet circuits, including proper fiber inspection techniques. Utilize the test set to confidently troubleshoot network faults and locate problems on optical Ethernet systems with rates up to 10G.

Course Number

TT-TB5800-ETH-OTDR

Course Highlights

Navigate the product GUI and menus to configure for fiber/OTDR testing and 10G Ethernet testing
Perform fiber optic connectivity/continuity and OTDR tests: inspection and cleaning of all optical connections, optical insertion loss (OIL) and optical return loss (ORL), end-to-end loss testing with optical power meter (OPM) and optical light source (OLS), OTDR cable analysis
Perform 10G Ethernet tests: inspection and cleaning of all optical connections; optical BER test on Layer 1; Layer 2 monitoring traffic, BER, loopback, timing tests; Layer 3 monitoring traffic, IP Ping and TraceRoute, loopback, end-to-end traffic generation tests; Layer 2 and 3 RFC 2544 and Y.1564 automated tests
Save and restore test configurations, using StrataSync and MobileTech App

Продолжительность

2 дня

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents an overview of the functions and general capabilities of the MTS/T-BERD 5800 V1 platform model. (This course covers the older v1 test sets.)

Course Number

TT-TB/MTS5800-OVRVW-SP

Продолжительность

1 час

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of the MTS/T-BERD 5800 V2 platform model. Learn how to set up the test set upon first use out-of-the-box and how to navigate the GUI and menus.

Course Number

TT-TB5800-V2OVRVW-SP

Продолжительность

30 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of COSA-4055 CWDM Testing using the MTS/TB-5800. Learn how to configure, perform, and retrieve test results for the COSA-4055 CWDM test.

Course Number

TT-TB5800-COSA-SP

Продолжительность

15 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents a detailed overview of CPRI testing using the TB/MTS-5800, including the recommended equipment and required information. Learn how to configure, perform, and retrieve test results for the CPRI test.

Course Number

TT‐TB5800‐CPRI‐SP

Продолжительность

1 день 30 часов

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents a detailed overview of OTDR and SmartLink Mapper testing using the TB/MTS-5800, including the recommended equipment and required information. Learn how to configure, perform, and retrieve test results.

Course Number

TT‐TB5800‐OTDR‐SP

Продолжительность

1 час

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of OTDR testing using the Smart Test Assistant with the TB/MTS-5800. Learn how to configure, perform, and retrieve test results for the OTDR Smart test.

Course Number

TT‐TB5800‐OTDR‐SMARTTST-SP

Продолжительность

15 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of the functions and general capabilities of the MTS/T-BERD 5800 V1 platform model. (This course covers the older v1 test sets.)

Course Number

TT-TB5800-P5000i-SP

Продолжительность

10 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of RFC-2544 Layer 2 Ethernet automated testing with the T-BERD/MTS-5800. Learn how to configure and perform RFC-2544 tests.

Course Number

TT-TB5800-RFC2544-SP

Продолжительность

15 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of RFC-6349 Layer 4 Ethernet TrueSpeed automated testing with the T-BERD/MTS-5800. Learn how to configure and perform RFC-6349 tests.

Course Number

TT-TB5800-RFC6349-SP

Продолжительность

14 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of Y.1564 Layer 2 Ethernet SAMComplete Testing with the MTS/TB-5800. Learn how to configure and perform Y.1564 tests using the SAMComplete feature.

Course Number

TT-TB5800-Y1564-SP

Продолжительность

16 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an assessment of the knowledge and skills possessed for performing Ethernet testing operations using the TB/MTS-5800 and fiber inspection probe to achieve an Ethernet Testing w/the TB/MTS-5800 Technician Certification.

Course Number

TT-TB5800-ETH-EXAM-SP

Продолжительность

1 час 30 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to navigate the TB/MTS-5800 GUI and menus to configure and perform DWDM testing with the OCC-4056 Optical Channel Checker (OCC). Learn how to locate and understand the OCC-4056 DWDM test results.

Course Number

TT-TB5800-DWDM-4056OCC-SP

Продолжительность

13 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of CPRI testing using the TB/MTS-5800. Learn how to configure, perform, and retrieve test results for the CPRI test.

Course Number

TT‐TB5800‐CPRI‐INTRO-SP

Продолжительность

19 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an assessment of the knowledge and skills possessed for performing OTDR testing operations using the TB/MTS-5800 and fiber inspection probe to achieve an OTDR Testing w/the TB/MTS-5800 Technician Certification.

Course Number

TT-TB5800-OTDR-EXAM-SP

Продолжительность

1 час 30 минут

Locations

Global

Языки

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

Validating the performance of our 5G network with the best available testing solutions is key to maintaining the quality of service that our subscribers expect as we evolve to tomorrow’s next-generation infrastructures.

Liuyan Han ,

Technical Director

China Mobile Research Institute

Поддержка на каждом этапе работы

Мы оказываем техническую поддержку, предоставляем услуги, программы обучения и все необходимые материалы. Наша деятельность направлена на максимальное повышение отдачи от ваших капиталовложений в систему VIAVI.

Позвольте вам помочь

Мы всегда готовы оказать вам всю необходимую помощь.

Платформа MTS-5800-100G

Портативная модульная сетевая тестовая платформа до 100GE

Обзор

Bit Error Rate Test

Опторефлектометрия

Submarine Cable Networks

Модули

Модули СWDM-опторефлектометрии (серия 4100)

Модули DWDM-опторефлектометрии (серия 4100)

Модули оптического рефлектометра (серия 4100)

Модуль анализатора оптического спектра CWDM (COSA-4055)

DWDM Optical Channel Checker Module (OCC-4056C)

Nano OSA Module (4100 Series)

Модуль расширения системы таймирования версии 2 (TEM V2)

Новости

Command The 5G Network: VIAVI Introduces 3D Geolocation for 5G Networks

OPTRONTEC Enters into a Licensing Agreement with VIAVI for 3D Sensing Filters

Command The 5G Network: VIAVI Extends Capabilities of O-RAN Test Suite

3 Challenges You Might Face with Open RAN

Ресурсы

Литература

Спецификации

Брошюры

Постеры

Приложения к руководствам

White Papers и книги

Практические кейсы

Краткие руководства пользователя

Руководства по подбору

Программное обеспечение

Предложения

Ceрвисы

Загрузка и обновление программного обеспечения

Видео

Вебинары

Службы

Care Support Plans

Factory standards to ensure accuracy

What are the most common implications of these issues to the business?

Factory standards to ensure accuracy

What are the most common implications of these issues to the business?

Техническая поддержка VIAVI Care

VIAVI Care Support for Existing Equipment

Repair and Calibration

Refurbished Equipment

Training Courses

Ethernet & IP (Layers 2 - 4) Fundamentals & Test Applications

Fiber Optic Fundamentals & Test Applications

Fiber Optic & OTDR Fundamentals & Test Applications

Fiber Optic Fundamentals & Test Applications for FTTx/PON

DWDM & PMD Fundamentals & Test Applications

Ethernet & IP (Layers 2 - 4) Fundamentals & Test Applications

Fiber Optic Fundamentals & Test Applications

Fiber Optic & OTDR Fundamentals & Test Applications

Fiber Optic Fundamentals & Test Applications for FTTx/PON

Basic Ethernet Key Concepts

DWDM & PMD Fundamentals & Test Applications

Basic Fiber Optic Inspection & Cleaning Before Connecting Concepts

Basic Fiber Optic Concepts

Basic Fiber Optic Testing Concepts

Basic FTTx, PON, and ROADM Testing Concepts

Basic IP Routing & MPLS Key Concepts

Basic Internet Protocol (IP) Key Concepts