FiberComplete PRO

The industry’s fastest Loss Test application provides the essential set of fiber link certification (Tier-1) and fault-finding measurements. Combining 5 test instruments in a single test port (light source, power meter, optic loss test set, ORL meter and fault finder) in a single instrument to deliver

• Fully automated bi-directional test process 
  • Insertion loss
  • ORL
  • Length
• Continuity check
• 4.5 seconds for two wavelengths
• Fault finder 
   

The TrueBIDIR application is the industry’s first solutions to provide on-board and real time bi-directional OTDR results analysis. Bi-directional OTDR analysis marries up loss information about every event on a fiber link and averages the measurements to provide a more accurate or ‘True’ loss measurement.

• End to end bi-directional and Loopback test processes
• On-board real time bi-directional OTDR analysis
• Averaged ‘True’ OTDR event losses
• Approximately 1 minute for test and on-board result processing for two wavelengths

FiberComplete™ is the first application to fully automate all the fundamental fiber-qualification tests (Tier 1 and 2). Combining 6 test instruments in a single test port (light source, power meter, optic loss test set, ORL meter, fault finder and OTDR) in a single instrument to deliver

• Fully automated bi-directional test process
  • Insertion loss
  • ORL
  • Length
  • OTDR with TrueBIDIR analysis
• Continuity check
• Intelligent OTDR test configuration
• Approximately 1 minute for test and on-board result processing for two wavelengths, less for uni-directional OTDR test
• Uniform test result and report naming structure

High Fiber count allows you to scale all of the bi-directional test capabilities and automate the test sequencing of high-density fiber cables. Multiple fibers can be certified with a one button press and a single test sequence, reducing certification and reporting times by over 80%.

• Fully automated bi-directional test process
  • Insertion loss
  • ORL
  • Length
  • OTDR with TrueBIDIR analysis
• Continuity check with MPO cable polarity (type A, B or C) and ribbon mapping
• Approximately 13 minutes for test and on-board result processing for two wavelengths (12 fibers)
• Fiber Cable Management

---

All FiberComplete PRO applications utilize a single test port connection followed by a single button press to execute a process which configures and performs tests, stores results with predefined naming structures and generates consolidated reports for all wavelengths tested. Results are shown in a single ‘Cable’ view that gives a real time overview of project progress and the pass/fail status of each fiber (or cable bundle) tested.