MAP-2100

用于远程 BER 测试的机架安装式测试设备

数据中心运营商对连接其数据中心、中心局或头端的网络的传输质量进行远程测试所需工具的不二之选。

对数据中心中存储的数据的完整性进行保护非常重要。正是因为知道这一点的重要性，大多数数据中心运营商都会通过高性能网络链路将数据备份到其他数据中心。为了保持这些连接的性能，并且为了验证 SLA，数据中心必须要经常对线速率高达 100G 及以上的以太网以及 OTN、CWDM 或 DWDM 环路执行比特误码率 (BER) 测试。问题在于，在许多数据中心中，能够运行测试以确保连接质量的技术人员寥寥无几。

MAP 2100 旨在使数据中心运营商能够在无人值守的数据中心安全地运行高性能比特误码率测试。

典型用例

局到局（数据中心互连）
- 场景：需要对站点间的网络进行测试，但任何一个站点都没有技术人员能够通过便携手持式测试仪
- 运行测试
- 解决方案：在两个站点均部署 MAP-2100，通过安全通信以远程方式运行测试
- 加密强度高达 256 位
- 通过 SSH（端口）转发所有管理连接，提高安全性
手动到局
- 场景：两个站点，但只有一个站点配备便携式测试仪和技术人员（通常为两人）
- 测试
- 解决方案：在一个站点上使用便携式 MTS-5800，在另一个站点上依靠机架安装式 MAP-2100 进行测试
- 只需一名技术人员便可运行测试，从而节省费用和人工
- 使用 Smart Access Anywhere，任一测试设备都可控制另一台设备
跨海线路
- 场景：跨大陆的多个机房，既有陆地部分，又有水下部分。需要对工厂之间的网络进行测试，确保网络功能正常。
- 解决方案：在多个站点部署 MAP-2100 设备，只需技术人员进行最少干预即可执行高效、高容量测试。
基于软件的测试和测量 (Fusion)
- 场景：混和物理和虚拟电路的“混合”网络有多个测试点（便携、机架安装和虚拟）；需要通过北向 Netconf/YANG 接口对这些测试点进行集中控制
- 解决方案：VIAVI Fusion 通过符合 LMAP 标准的架构在多个物理和虚拟测试点上运行标准化 BERT 和性能监控 (TWAMP)。

特点：

针对远程无人干预测试优化，采用机架安装式设计，并具备远程管理功能
以太网测试，1G 至 100G 线速率（10G、25G、40G、100G）
完全支持包括以太网、OTN、SONET/SDH、PDH、光纤通道（最高 32G）、CPRI 在内的协议

应用：

对连接数据中心或中心局/头端的网络链路的传输质量进行远程测试
数据中心及核心网络/城域网中 10 Mbps 至 100G 接口的融合以太网/IP 网络测试及故障排查
OTN 以及传统 SONET/SDH 和 DSx/PDH 网络的安装和维护

主要特点：

机架安装，1U 19 英寸宽，提供 21 英寸套件
业界最快的 RFC 2544 和 Y.1564 SAMComplete™ 以太网服务激活测试（包括纳秒级精度延迟测量）。还支持 RFC 6349 TrueSpeed
通过现场优化的光学器件自检确保 SFP+/SFP28、QSFP+/QSFP28 和 CFP4 模块无误运行
借助 OTN 检查工作流自动化脚本测试 OTN 服务激活
使用内置的 GNSS 测试同步和定时
至32G 的光纤通道
SONET SDH/PDH
借助内置 GNSS 测试以太网单向延迟

Part of The VIAVI Remote PHY Solution

This product is part of the comprehensive VIAVI Remote PHY turn-up and maintenance solution enabling seamless transitions from legacy to distributed access architectures.

资料

手册

应用指南

快速参考

视频

网络研讨会

Care Support Plans

Product Group	Recommend Plan	Bronze	Silver	Maxcare	Why Calibrate?
MAP (Mainframe/Module)	Bronze-3				It is essential in manufacturing environment to ensure your product meets the published/customer requirements. Having accurate measurements ensures highest possible yields whilst maintaining product specifications. Ensuring all that the optical test equipment is performing as designed and calibrated is requirement in achieving that goal. Viavi will validate measurement accuracies conform to published specifications. Maintain connectors and pigtails. Factory standards to ensure accuracy MAP VIAVI is a TL9000 company and calibrates this instrument based on general requirements for the competence of calibration and testing laboratories (ISO/IEC 17025:2005) to ensure your instrument is certified to measure accurately. Instruments that are out of calibration will produce unreliable measurements and can create false passing or false failing test results that often cause your team repeat work. We maintain, polish and clean all fiber connectors, fix pigtail connections that are internal to the product to ensure all parts stay in good working order and upgrade software / firmware to the latest approved release to enable enhancements. VIAVI Care Plans are the most cost-effective way to plan for calibration with a low, discounted price at the time of instrument purchase. Fixed rate calibration can also be purchased later via a separate purchase order. Ensure accurate measurements that meet design expectations and optical budgets. Maintain ports and connectors to keep signals working properly and to extend the life of the instrument. For example, if optical connectors or lasers are bad or interface ports are loose then after repeated connection cycles, optical measurements may be inaccurate or damage may occur. When manufacturing optical network products, accurate, reliable and repeatable optical measurement performance is essential to compliance with published/committed product specifications Know that optical product design, product manufacturing and customer expectations are accurate and in alignment throughout product lifecycle Why calibrate this product? Inaccurate measurements may prevent verification of power levels or introduce other measurement uncertainties, errors and artifacts. Out-of-calibration instruments can result in design errors, production problems, end customer escalations, increased failure rates, audit non-compliance or even ultimately loss of business. What are the most common implications of these issues to the MAP business? Uncalibrated tools produce unreliable measurement results that can't be certified to specifications and may violate product agreements or ISO/TL9000 standards with your customers and their network equipment vendors. Design errors resulting from inaccurate measurements can result in ongoing issues throughout the product lifecycle including poor yields, inaccurate optical budgets, increased return rates and customer expectation mismatch. Production costs can be elevated by increased re-work, reduced yield and inconsistencies between measurements. Common Business impacts include: Lost revenue, customer complaints and increased costs. Quality audit failures. For end customers, repeat product quality issues with vendors often cause added cost, customer dissatisfaction and loss of business. What are the common issues?

VIAVI Care 支持

服务	BronzeCare	SilverCare	MaxCare	GoldCare	FleetCare
	图像	图像	图像	图像	图像
技术支持	高级版	高级版	高级版	高级版	高级版
工厂维修				标准服务 + 定制菜单：现场校准和培训，FAE 天数，自定义工程或软件订阅
优先服务
自定进度的培训
5 年电池和包覆盖 *
工厂校准
配件覆盖
备机借用

* 仅限 5 年计划；如果适用

电池/包覆盖
电池和包会随着日常使用和充电周期而磨损。为了确保这些项目不会拖累您，我们的 5 年计划包括在您的 5 年计划的整个生命周期内进行更换。

在为期 5 年的 SilverCare 或 MaxCare 支持计划期间，VIAVI 将提供一次更换损坏的电池和磨损的软包/手套的服务。只有当仪器被送回 VIAVI 进行维修或校准服务时，才会更换该仪器。硬箱排除在外，覆盖不适用于不带包/电池销售的仪器。

此覆盖包括在 5 年 Silver 和 MaxCare 计划中

MaxCare 配件更换覆盖
仪器产品配有配件电缆和连接器端子。为了确保可靠、准确的测试，我们将每年更换一个配件，以确保良好的测试结果。

当配件被确定为有缺陷或有故障时，VIAVI 将免费为客户修理配件或根据 VIAVI 的判断进行更换。更换的配件可能是新的，也可能是翻新的。所有退回的配件归 VIAVI 所有。适用以下限制：每 12 个月内可更换的配件最多为一个；适用的配件仅包括那些被认为对仪器运行至关重要且随原始购买产品一起发货的附件。如果存在问题，或者在校准或维修服务事件期间，客户有责任将有故障的附件寄回 VIAVI。

备机借用
现在您无需停机便可安排校准或维修。备机借用服务可在您将设备送去校准或进行突发性检修时向您出借类似配置的设备。

VIAVI Care Support for Existing Equipment

FleetCare

FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.

Any collection instruments with a single coterminous renewal date
Each contract is customized with any number of annual terms required by the customer
Onsite Calibration, Training, Field Application Engineer days can be added

View Brochure

Repair and Calibration
Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles. We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests.

Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:

Minimize business disruption

Budget

Measurement Accuracy and Product Reliability

Measurement Compliance, TL9000 certification and OEM Standards

Explore More

每一阶段的支持

我们提供您所需的支持、服务、全面培训以及资源。这只是我们为最大程度提升您投资的价值所作努力的一部分。

我们倾力相助

我们倾力相助，为您获得成功加油。

MAP-2100